Input

book: Create a structured PDF document with headings, chapters, etc.
webpage: Specifies that the HTML sources are unstructured (plain web pages.) A page break is inserted between each file or URL in the output.
continuous: Specifies that the HTML sources are unstructured (plain web pages.) No page breaks are inserted between each file or URL in the output.
Title of the document for the front page.
Extract the first heading of the document and use it as title. If checked the title field has no effect.
The title image or HTML page. These file has to be an attachments!
Specify document version to be displayed on the title page.
Intellectual property owner of this document.
Copyright notice for this document.
Information about who and when modified the document are applied at the end.

Output

Specifies the output format.
Grayscale document  Title page
Compression :   JPEG big images 

Page

 
User defined page size 
Choose one of the predefined standard sizes or select user defined.
Specifies the page size using a standard name or in points (no suffix or ##x##pt), inches (##x##in), centimeters (##x##cm), or millimeters (##x##mm).
Set the target browser width in pixels (400-1200). This determines the page scaling of images.
   2-Sided   Landscape
   
   
   
Specifies the margin size using points (no suffix or ##x##pt), inches (##x##in), centimeters (##x##cm), or millimeters (##x##mm). Keep empty for default value.
Left
Middle
Right
Sets the page header to use on body pages.
Left
Middle
Right
Sets the page footer to use on body pages.

Contents

Sets the number of levels in the table-of-contents. Empty for unlimited levels.
   Numbered headings Check to number all of the headings in the document.
Sets the title for the table-of-contents. Empty for default title.
Left
Middle
Right
Sets the page header to use on table-of-contents pages.
Left
Middle
Right
Sets the page footer to use on table-of-contents pages.

Colors

Enter the HTML color for the body (background).
Enter the image file for the body (background). These file has to be an attachments!
Enter the HTML color for the text.
Sets the color of links.
Enables generation of links in PDF files.

Fonts

Set the default size of text.
Set the spacing between lines of text.
Choose the default typeface (font) of text.
Choose the default typeface (font) of headings.
Set the size of header and footer text.
Choose the font for header and footer text.
Change the encoding of the text in document.
Check to embed font in the output file.

PDF

Controls the initial viewing mode for the document.
Document: Displays only the docuemnt pages.
Outline: Display the table-of-contents outline as well as the document pages.
Full-screen: Displays pages on the whole screen; this mode is used primarily for presentations.
Controls the initial layout of document pages on the screen.
Single: Displays a single page at a time.
One column: Displays a single column of pages at a time.
Two column left/right: Display two columns of pages at a time; the first page is displayed in the left or right column as selected.
Choose the initial page that will be shown.

Security

Check to number all of the headings in the document.
 Print   Modify
 Copy   Annotate
Specifies the document permissions.
Specifies the user password to restrict viewing permissions on this PDF document. Empty for no encryption.
Specifies the owner password to control who can change document permissions etc. If this field is left blank, a random 32-character password is generated so that no one can change the document.

Expert

Specify language to use for date and time format.
Shrink code blocks on page.
Show line numbers for code blocks.
Make spaces visable by dots (·) instead of white spaces.
Make line breaks visable by a extra character (¶) at the end.
Enable this feature if you searching for problems or intent to report a bug report

About

Version 2.4.2 (MoinMoin 1.9.7)


MoinMoin - Generate PDF document using HTMLDOC

This action script generate PDF documents from a Wiki site using
the HTMLDOC (http://www.htmldoc.org) software packages which has
to be preinstalled first.

Copy this script in your's MoinMoin action script plugin directory.

Thanks goes to Pascal Bauermeister who initiated the implementaion.
Lot of things changes since then but the idear using HTMLDOC is the
main concept of this implementation.

Please visit the homepage for further informations:
http://moinmo.in/ActionMarket/PdfAction

@copyright: (C) 2006 Pascal Bauermeister
@copyright: (C) 2006-2010 Raphael Bossek <raphael.bossek@solutions4linux.de>
@license: GNU GPL, see COPYING for details

       

Italiano English
Edit History Actions

Firenze/OONF

OLSRv2

Compilazione/Installazione

OpenWRT/LEDE

Su OpenWRT/LEDE è sufficiente installare il pacchetto con il comando

opkg update
opkg install oonf-olsrd2

Debian

OLSRv2 non è pacchettizzato per Debian, quindi è necessario compilarlo dai sorgenti. Scaricate l'ultima versione dei sorgenti da: https://github.com/OLSR/OONF Installate le dipendenze:

apt-get update
apt-get install bison flex build-essential cmake libnl-3-dev

Entrate nella directory "build", dentro al codice di OLSRv2 ed eseguite

cmake ..
make
make install

se si vuole usare olsr2_dynamic è necessario esportare il percorso delle librerie:

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib

E' possibile lanciare olsrd2 con il seguente comando:

/usr/local/sbin/olsrd2_static -l /etc/olsrd2.conf

Configurazione

OpenWRT/LEDE

config olsrv2 'olsrv2'
        list lan '10.150.9.0/24'

config log 'log'
        option file '/var/log/olsrd2.log'

config global 'global'
        option lockfile '/var/lock/olsrd2'
        option pidfile '/var/run/olsrd2.pid'

config interface 'olsr2_common'
        list ifname 'loopback'
        list ifname 'Ant1'
        list ifname 'Ant2'
        list ifname 'Ant3'
        list ifname 'Ant4'

config telnet 'telnet'
        option port '2009'
        option bindto '127.0.0.1'

Debian

Questo è un file di esempio di configurazione: basta sostituire le interfacce con quelle specifiche della vostra configurazione.

[global]
        plugin remotecontrol
        plugin auto_ll4
[telnet]
        bindto  127.0.0.1
        port 2009
        
[olsrv2]
        lan 10.150.x.0/24
                        
[interface=eth1.2]
[interface=eth1.3]
[interface=eth1.4]
[interface=eth1.5]
[interface=lo]

init.d files

/etc/init.d/olsrd2

### BEGIN INIT INFO
# Provides:          olsrd2
# Required-Start:    $network $remote_fs $syslog
# Required-Stop:     $network $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: /etc/init.d/olsrd2: start olsrd2
### END INIT INFO

#               Based on skeleton script written by Miquel van Smoorenburg <miquels@cistron.nl>.
#               Modified for Debian 
#               by Ian Murdock <imurdock@gnu.ai.mit.edu>.
#               Modified for olsrd
#               by Holger Levsen <debian@layer-acht.org>
#               Modified for olsr2
#               by Gabriele Gemmi <gabriel@autistici.org>
# 
# Version:      21-Dec-2006  
# modified:     01-Aug-2007
#               31-Jun-2008
#               30-May-2009

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/local/sbin/olsrd2_static
NAME=olsrd2_static
DESC=olsrd2

PID_FILE=/var/run/$NAME.pid

test -x $DAEMON || exit 0

# Include olsrd defaults if available
if [ -f /etc/default/olsrd2 ] ; then
        . /etc/default/olsrd2
fi

set -e

case "$1" in
  debug)
        echo -n "Starting $DESC: "
        # sleep til olsrd has been started
        while ! pidof $NAME > /dev/null ; do 
          sleep 1
        done
        echo "$NAME."
        echo $(pidof $NAME) > $PID_FILE
        ;;
  start)
        if [ "$START_OLSRD2" != "YES" ] ; then exit 0 ; fi
        if [ "$(pidof $NAME)" != "" ] ; then 
                echo "$NAME already running, doing nothing."
                exit 0
        fi
        echo -n "Starting $DESC: "
        start-stop-daemon --start --quiet --exec $DAEMON --pidfile $PID_FILE -- $DAEMON_OPTS
        # sleep til olsrd has been started
        while ! pidof $NAME > /dev/null ; do 
          sleep 1
        done
        echo "$NAME."        
        echo $(pidof $NAME) > $PID_FILE
        ;;
  stop)
        pidof $NAME || exit 0
        echo -n "Stopping $DESC: "
        start-stop-daemon --stop  --quiet --exec $DAEMON --pidfile $PID_FILE
        rm -f $PID_FILE
        echo "$NAME."
        ;;
  restart|force-reload)
        echo -n "Restarting $DESC: "
        $0 stop
        sleep 1
        $0 start
        ;;
  *)
        N=/etc/init.d/$NAME
        echo "Usage: $N {start|stop|restart}" >&2
        exit 1
        ;;
esac

exit 0

/etc/default/olsrd2

# Defaults for olsrd2 initscript
# sourced by /etc/init.d/olsrd2
# installed at /etc/default/olsrd2 by the maintainer scripts

#
# This is a POSIX shell fragment
#

#
# uncomment the next line run olsrd automatically at startup
#
START_OLSRD2="YES"

#
# debuglevel from 1 (=quiet) to 9 (=max debug)
# for running from init.d 0 is recommended
#

#
# "command-line options"
#
DAEMON_OPTS="--set global.fork=true -l /etc/olsrd2.conf"

Ricordate di darei permessi di esecuzione allo script e di farlo partire all'avvio:

chmod +x /etc/init.d/olsrd2
update-rc.d olsrd2 defaults

Management e Troubleshooting

Per controllare lo stato di OONF è possibile usare questi comandi: Visualizzare lo stato delle interfaccie

echo "/nhdpinfo interface" | nc 127.0.0.1 2009

Visualizzare i vicini

echo "/nhdpinfo neighbor" | nc 127.0.0.1 2009

Netjson

echo "/netjsoninfo filter graph ipv4_0" | nc 127.0.0.1 2009