FirmwareScooreggione

TODO: fare IPv6
root@OpenWRT:~# cat /etc/config/network 

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config interface 'lan'
        option ifname 'eth0'
        option proto 'static'
        option ipaddr '10.CAP.0.x'
        option netmask '255.255.255.0'
        option dns '10.11.12.13'

config interface backbone
        option ifname 'wlan0'
        option proto 'static'
        option ipaddr '172.16.CAP.x'
        option netmask '255.255.0.0'
        option dns '10.11.12.13'

config interface 'wan'
        option ifname 'eth1'
        option proto 'none'

root@OpenWRT:~# cat /etc/config/wireless 

config wifi-device 'radio0'
        option type 'mac80211'
        option channel '100'
        option distance '1000'  ###distanza link in metri
        option hwmode '11na'
        option macaddr '00:15:6d:8c:93:86'
        list ht_capab 'SHORT-GI-40'
        list ht_capab 'TX-STBC1'
        list ht_capab 'RX-STBC1'
        list ht_capab 'DSSS_CCK-40'
        option htmode 'HT40+'  ###Canale a 40 Mhz
        option noscan '1'

config wifi-iface
        option device 'radio0'
        option network 'backbone'
        option mode 'ap'
        option isolate '1'
        option ssid 'ninux.org'
        option encryption 'none'
Esempio di configurazione come AP
